Update ILOM Firmware on a SPARC T4-1

In this example, I’m going to update a SPARC T4-1 to firmware version 8.9.10

1.  Check for the latest version of firmware at this URL:
https://www.oracle.com/technetwork/systems/patches/firmware/release-history-jsp-138416.html

The following table is displayed showing the firmware updates for the entire SPARC family:

2. Scroll down to locate your server.
Click on the most recent update in the table.  For the T4-1, the most recent update is 152475-08

Click on the link in the table, sign into Oracle’s support site and download the update as a .zip file to the SPARC server that you will be updating.

3. On the Solaris SPARC server, unzip the update and the following files are listed:

root:~/152475-08# ls -l

total 34939
-rw-r--r--   1 root     root       79283 Aug 27 15:04 152475-08.html
-rw-r--r--   1 root     root          72 Aug 27 15:04 copyright
-rw-r--r--   1 root     root        4033 Aug 27 15:04 Install.info
-rw-r--r--   1 root     root         725 Aug 27 15:04 LEGAL_LICENSE.TXT
-rw-r--r--   1 root     root         713 Aug 27 15:04 license.txt
-rw-r--r--   1 root     root        1350 Aug 27 15:04 metadata.xml
-rw-r--r--   1 root     root       57773 Aug 27 15:04 README.152475-08
-rw-r--r--   1 root     root     17575122 Aug 27 15:04 Sun_System_Firmware-8_9_10-SPARC_T4-1.pkg
-rwxrwxrwx   1 root     root       16596 Aug 27 15:04 sysfwdownload
-rw-r--r--   1 root     root        9931 Aug 27 15:04 sysfwdownload.README

The Sun_System_Firmware-8_9_10-SPARC_T4-1.pkg file is the firmware update file.

4. Use the sysfwdownload utility which is delivered with the update to install the update. The README file contains information on the options available to this utility.  The sysfwdownload -h command will also display help.

Install the update as follows:

# ./sysfwdownload -u Sun_System_Firmware-8_9_10-SPARC_T4-1.pkg
    1. The update gets sent to the service processor, the OS shuts down and the service processor stops (powers off).
    2. The ssh network connection to ILOM will disconnect.
    3. After a few minutes, the service processor will start the system (start /SYS).
    4. After approx. 10 minutes (or wait until you hear the server power on), connect back to the ILOM with ssh and you should be able to login and verify the update as follows:
-> show /HOST/ sysfw_version 
   /HOST 
      Properties: 
        sysfw_version = Sun System Firmware 8.9.10 2018/04/19 12:16

Or, from the OS shell prompt, type:

root@sparct4:~/152475-08# ./sysfwdownload -g
8.9.10

1 thought on “Update ILOM Firmware on a SPARC T4-1”

Leave a Reply to Jung Lee Cancel Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

This website uses cookies to ensure you get the best experience on our website.